Rayonshine
Nelson Bubble Pendant Lamp B
Model
Color
Choose options
Model
Color
Model
Color
Lightweight wireframe pendant with translucent plastic diffuser casts soft ambient light in five sizes.
The Nelson Bubble Pendant Model B is a flat, disc-shaped fixture ranging from 16 inches to 32 inches wide—big enough to anchor a dining table or living room cluster. It produces soft, diffused light through a translucent white shell with an internal crisscross wire pattern visible when lit. Works well over kitchen islands, dining tables, or grouped in threes; verify your ceiling can accommodate hardwired installation (not compatible with sloped ceilings).
Lightweight steel skeleton wrapped in translucent white plastic. No bulb included; takes standard E26 or E27 base bulbs.
Post-war industrial structure adapted for home use. Proven form works in modern and mid-century rooms alike.
From 16″ diameter up to 32″. Taller models suit higher ceilings; smaller works over kitchen counters or side tables.
Does this come with a bulb?
No. You supply an E26 or E27 bulb—LED, incandescent, or vintage styles all fit. Warm white (2700K) brings out the organic light quality.
Can I install it on a sloped ceiling?
No. Flat roof installation only. If your ceiling is angled, this fixture is not compatible.
How does this work as a plug-in pendant light?
It doesn't. This is hardwired to your ceiling circuit. A licensed electrician must install it; it cannot be converted to plug-in.
How many should I buy for a kitchen island?
Three or five pendants spaced evenly (12–18 inches apart) over a standard island. Refer to assembly instructions for spacing and wiring layout.
Steel bends.
Silk settles.
Light glows.
Six silhouettes, one construction: bare wire spun into shape, wrapped in a single length of silk fiber, cured until it holds its own light.
Shop the Collection →
See the shape catch the light
One wire, wound by hand
There's no mold in this collection, and no two shades come out quite the same. A shape starts as bare wire and ends as something that holds light like paper holds ink — soft at the edges, structured underneath.
It's the same logic mid-century designers reached for: let the material do the work, and don't hide how a thing is made. What you see on the outside is what's actually holding it up.
The winding is where the hand shows. That's the part we didn't try to make perfect.
From wire to warm light — four steps
Spin the frame
Bare steel wire, spun on a jig until it locks into the shape's exact curve — no mold, no shortcuts.
Wind the fiber
A single length of silk-fiber cord, wound over the frame edge to edge in one unbroken pass by hand.
Cure the skin
Heat sets the wound fiber into a firm, self-supporting shell — it holds its shape with the frame removed.
Fit and finish
Socket, canopy, and hardware go on by hand, then every shade is checked for an even glow.
What it's made of
A steel wire frame wrapped in a single length of silk-fiber cord, cured into a firm shell that holds its own shape. Canopy and hardware finished in matte black or brushed brass.
Works with any standard dimmer switch. Built for indoor use only.
Keeping it right
- Dust with a soft, dry brush or a hair dryer set to cool — skip the damp cloth.
- Keep it away from moisture and high humidity.
- Stay at or under the rated wattage to protect the fiber shell.
- Carry it by the frame, never by the shell itself.
A shape from 1952
Back in 1952, this shape got its glow from a plastic webbing sprayed straight onto a wire frame — a fast process built for a soft, even light. We kept the wire, but swapped the spray for something slower: mulberry silk fiber, wound by hand. Same silhouette, same idea, just a warmer surface under your hand and a longer process behind it.
Six shapes, one language
Nelson Bubble Pendant Lamp A
Wide and low — this shape spreads a soft, even wash of light across whatever sits below it.
Nelson Bubble Pendant Lamp B
Taller and narrower, with a lower drop — reads well over a staircase or a narrow dining table.
Nelson Bubble Pendant Lamp C
A true sphere — light spreads evenly no matter which side of the room you're standing in.
Taraxacum Suspension Lamp
Several arms of wire and fiber radiating from one core — the largest, most sculptural piece in the collection.
Nelson Wall Sconce
The same wire-and-silk build, flattened against a back plate — made for hallways and tighter walls.
Nelson Table Lamp
The same shade set on a slim tripod base — sized for a console table or a nightstand.
Before you order
What's the silk-fiber shell actually made of?
A single length of fiber cord, wound over a steel wire frame and cured into a firm, self-supporting shell — the same idea as the mid-century originals, built with a more durable fiber blend.
Is it dimmable?
Yes — any standard dimmer switch works. A warm-dim LED bulb will keep the shell's color true at low output.
How is Pendant A different from B and C?
Same build, three profiles: A is wide and low (Saucer), B is taller and narrower (Ellipse), C is a true sphere (Ball). Pick based on how much spread you want and how much ceiling height you're working with.
Can it hang outdoors or in a bathroom?
No — this collection is built for indoor, dry-location use only. The fiber shell isn't sealed against moisture.
What's the lead time?
Get in touch for current lead times — every shade in this series is wound to order.
And Much More
Explore Our Collections
Shop with Confidence – Guaranteed Support
At RayonShine, we prioritize your shopping experience by offering high-quality products, secure transactions, and reliable after-sales support. With our trusted payment methods, professional customer service, and hassle-free return policies, you can shop with confidence knowing that we’ve got you covered every step of the way. Your satisfaction is our commitment!