Two soft white discs balanced in mid-air on a slender gold stem — a sense of soaring stillness, captured in pendant form.
The Envolee Double Biscuit is a contemporary pendant light built around a single sculptural idea: two stacked discs floating in vertical balance. The form is deliberately literal — "Double Biscuit" describes what you see, two biscuit-shaped shades held one above the other on a gold metal frame. Elegance, balance and harmony are the working principles; the lamp aims for the kind of lightness that defines refined contemporary design. From first sketch to final installation, the designer remains involved across every production stage, working in the fusion of art and craft disciplines — combining traditional manufacturing methods with modern technology, where sensitivity, skill and lightness sit at the core. Available in four size combinations spanning compact island pendants (Dia 40cm x H 60cm) to architectural statement pieces (Dia 60cm x H 70cm), each with integrated LED in your choice of Warm White or Cool White.
A faithful representation of a contemporary designer's pendant light — work shaped by elegance, balance, and harmony, in the fusion of art, craft, and modern technology. Sensitivity, skill, lightness.
Important — not dimmer-compatible. The integrated LED works with standard household on/off switches only. Do not install on a dimmer-switch circuit — it will cause flicker, premature LED failure, or both. If dimming is essential to your installation plan, please choose a different fixture before ordering. The LED is integrated and cannot be swapped.
| Sizes available | Dia 40cm x H 60cm · Dia 40cm x H 70cm · Dia 60cm x H 60cm · Dia 60cm x H 70cm — choose at checkout |
| Imperial | ∅ 15.7" x 23.6" / 15.7" x 27.5" / 23.6" x 23.6" / 23.6" x 27.5" |
| Material | Metal frame, acrylic + PVC shades |
| Frame finish | Gold (single fixed finish — choose at checkout) |
| Lampshade | White acrylic / PVC, light-diffusing |
| Light source | Integrated LED (no bulb required) |
| Color temperature (Kelvin) | Warm White · Cool White — factory-set, choose at checkout |
| Bulb replacement | Not required — LED is built in |
| Dimmable | No — standard household on/off switches only |
| Suspension | 50 cm / 19.7" metal rod (custom lengths available on request) |
| Voltage | AC 110–240V, full-range |
| Wiring | Hardwired (ceiling junction box) |
| Ceiling type | Flat ceilings only · not compatible with sloped or vaulted ceilings |
| IP rating | IP20 — indoor use only, not waterproof |
| Packing size | L 65cm x W 65cm x H 18cm |
| Certifications |
North America Europe Australia Middle East
|
- Hardwired ceiling installation — a licensed electrician is recommended for safe mounting, wiring, and grounding.
- Watch the Installation video and the lit showcase video for visual reference of the assembled silhouette and color temperature.
- Flat ceilings only. The canopy and 50 cm suspension rod are designed for level mounting planes — sloped or vaulted ceilings are not compatible without a separate swivel-canopy adapter.
- No bulb required. The LED is integrated and factory-tuned to your selected color temperature (Warm White or Cool White) — simply wire the fixture, restore power, and the light is ready.
- Do not install on a dimmer circuit. The integrated LED is not dimmer-compatible — confirm the wall switch is a standard on/off type before installation.
- Suspension drop is 50 cm (19.7") standard. For dining tables, the bottom of the lower disc should sit roughly 75–90 cm above the table surface; for general focal pendants, roughly 180–200 cm above the floor. Custom rod lengths can be specified at order time if standard length doesn't suit your installation.
- Unbox carefully and lift the fixture by the frame, never by the acrylic shades. Handle with clean, dry hands during initial setup to avoid marking the freshly-finished gold frame.









































