Toledo Pendant Light
Toledo Pendant Light – detail 2
Toledo Pendant Light – detail 3
Toledo Pendant Light – detail 4
Toledo Pendant Light – detail 5
Toledo Pendant Light – detail 6
Toledo Pendant Light – detail 7
Toledo Pendant Light – detail 8
Toledo Pendant Light – detail 9
Toledo Pendant Light – detail 10
Toledo Pendant Light – detail 11
Toledo Pendant Light – detail 12
Toledo Pendant Light – detail 13
Toledo Pendant Light – detail 14
Toledo Pendant Light – detail 15
Toledo Pendant Light – detail 16
Toledo Pendant Light – detail 17
Toledo Pendant Light – detail 18
Toledo Pendant Light – detail 19
Toledo Pendant Light – detail 20
Toledo Pendant Light – detail 21
Toledo Pendant Light – detail 22
Toledo Pendant Light – detail 23
Toledo Pendant Light – detail 24

Rayonshine

Toledo Pendant Light

Sale price$160.00
SKU: RSP-HDSO40
Size:Dia 18cm x H 15cm / ∅ 7.1″ x H 5.9″
Color:Walnut Color & Beige
Quantity:

Made to order · free U.S. shipping (FedEx / UPS, tracked)

PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout

Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Toledo Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →

Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →

Plan the ceiling

How high, how wide, how many.

Numbers from our Sizing & Installation guide. Read the guide →

Over the dining table

Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.

Pair with a dimmer · 3,000–6,000 lm for the room

Kitchen island

One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.

Set of 3 · 450–600 lm each

Room centre

Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.

Single · round up for high ceilings

01Overview

Travertine and walnut pendant that works alone or grouped, three sizes for any ceiling height.

The Toledo is a shallow pendant—7 inches tall—that reads as a sculptural disk, not a hanging blob. Warm light pools downward through the travertine without glare; the wood canopy anchors it visually. Mount one over a kitchen sink or bar, or hang three to five across an island. Check your ceiling type: flat installation only, not sloped.

02Gallery
Toledo Pendant LightToledo Pendant LightToledo Pendant LightToledo Pendant Light
03Materials & Craft
Travertine and wood

Natural stone shade with walnut-finish canopy. Travertine veining varies per piece—no two are identical.

Warm downlight focus

Central LED aperture directs light down. No uplight or glare. Works with standard dimmers.

Three diameters, one height

18, 28, or 33 cm wide; all 15 cm tall. Mix sizes or match for visual rhythm.

04Size
Small7.1″ diameter × 5.9″ height (18 cm × 15 cm)
Medium11″ diameter × 5.9″ height (28 cm × 15 cm)
Large13″ diameter × 5.9″ height (33 cm × 15 cm)
Cord length59″ (150 cm) standard; custom lengths available on request
05Dimensions
Toledo Pendant Light dimensions
Toledo Pendant Light dimensions
06Specifications
MaterialTravertine shade, solid wood canopy (walnut finish), metal hardware
Socket or Light sourceE26 or E27 base (standard US/international screw socket)
Recommended bulb or KelvinNot included; use warm white 2700K LED for best effect
VoltageAC 110–240V (works worldwide)
PowerDepends on bulb selected; fixture itself is low-draw
SwitchCompatible with standard household on/off switches and dimmers
Cord or Cable59″ fabric-wrapped suspension cable; custom lengths available
EnvironmentIndoor only; not waterproof (IP20 rating)
CareDust travertine with soft, dry cloth; avoid water and harsh cleaners
07Downloads
Data SheetPDFAssembly InstructionsComing soon3D FilesComing soon
08Questions
Can I use this over a kitchen island?

Yes. Space three to five pendants 24–30 inches apart across a 36–48 inch island. Use the medium or large size for better coverage and visual weight.

Does it work with dimmers?

Yes, it's fully compatible with standard household dimmers. Use a dimmable LED bulb for flicker-free control.

What bulb do I need?

Any E26 or E27 base bulb. We recommend warm white 2700K LED (60W equivalent or less) to match the wood and stone tones. Bulb not included.

Can I install this on a sloped ceiling?

No, flat ceilings only. The canopy and cable suspension are designed for horizontal mounting.

Stone thatholds the light

Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.

I

From block to lamp

Every piece in the series goes through the same four stages in the workshop.

  1. Raw travertine blocks
    01

    Choosing the block

    Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.

  2. Cutting the stone
    02

    Cutting

    Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.

  3. Shaping by hand
    03

    Shaping by hand

    Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.

  4. Finished shades before assembly
    04

    Finishing and fitting

    Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.

II

One stone, two cuts

Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.

Vein-cut travertine with straight banded stripesHover to look closer

Vein cut

Sawn against the layers. The growth bands show as straight, parallel stripes in cream and honey.

Seen on Lytheris and Maytoni

Cross-cut travertine with cloudy pattern and open poresHover to look closer

Cross cut

Sawn along the layers. The surface turns soft and cloudy, scattered with the open pores travertine is known for.

Seen on Kennett, Lindby and Kairi

III

Up close

The details you only notice once the lamp is on your ceiling.

Light falling from a carved fold in a travertine wall lamp

A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.

Carved ribs on a travertine pendant

Carved ribs. Candeeiro's rippled body, shaped by hand.

Rounded travertine edge of a ceiling light

Softened edges. Lindby's bezel, rounded over by hand.

Bulb socket bored into solid travertine

Bored from solid. The socket sits inside the stone itself.

Travertine shade topped with a walnut-color wood ball

Stone and wood. A walnut-color sphere caps Herda.

Underside of a travertine pendant glowing warm

A warm underside. Light pools inside Sumit's shallow bowl.

Travertine cone meeting a wood collar

A clean joint. Stone meets wood on Melrose.

Open pores across a travertine shade

Pores left open. Honed smooth, holes and all.

Turned travertine cylinder

Turned true. Toscot's cylinder, bored through.

Polished travertine spheres at the factory, each with its own veining
V

What natural stone means for you

  • Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
  • Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
  • Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
  • Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI

Pieces from the series

Reviews

On their walls, in their words.

Complete the set

Two of one height, or three staggered.

Same footprint, same finish palette — a run reads as one composition.

Dia 18cm x H 15cm / ∅ 7.1″ x H 5.9″
Dia 18cm x H 15cm / ∅ 7.1″ x H 5.9″
Dia 28cm x H 15cm / ∅ 11″ x H 5.9″
Dia 28cm x H 15cm / ∅ 11″ x H 5.9″
Dia 33cm x H 15cm / ∅ 13″ x H 5.9″
Dia 33cm x H 15cm / ∅ 13″ x H 5.9″

Staggered set — same footprint, centres level on the wall

Dia 18cm x H 15cm / ∅ 7.1″ x H 5.9″ Dia 18cm x H 15cm∅ 7.1″ x H 5.9″ · Walnut Color & Beige $160.00
Dia 28cm x H 15cm / ∅ 11″ x H 5.9″ Dia 28cm x H 15cm∅ 11″ x H 5.9″ · Walnut Color & Beige $168.00
Dia 33cm x H 15cm / ∅ 13″ x H 5.9″ Dia 33cm x H 15cm∅ 13″ x H 5.9″ · Walnut Color & Beige $175.00

Set of 3, one of each height · $503.00 · one finish

Compare

Toledo Pendant Light next to this year's other best-sellers.

All in this category · 487 →
This pieceToledo Pendant Light Toledo Pendant Light Travertine · WoodMolten Glass Pendant Light Molten Glass Pendant Light GlassView →Molten Glass Round Pendant System Molten Glass Round Pendant System GlassView →Gregg Pendant Lamp Gregg Pendant Lamp GlassView →
Price$160.00 – $175.00$130.00 – $479.00$540.00 – $2,118.00$138.00 – $242.00
Sizes3 · Dia 18cm x H 15cm / Dia 28cm x H 15cm / Dia 33cm x H 15cm4 · Dia 18cm / Dia 28cm / Dia 38cm7 · 3 heads (28cm*2 / 5 heads (28cm*5 / 5 heads (28cm*33 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm
Finish × glassWalnut Color & Beige (1)Red / Gold / Silver / Smoke gray (4)Rose Gold / Gold / Smoky gray / Silver (4)White (1)
Light & dimmingSee specificationsSee specificationsSee specificationsWarm White / Cool White
RatingNew★ 4.57 (77)★ 4.73 (37)★ 4.72 (46)