Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Cart
Your cart is empty
Choose options
Plan the ceiling
Numbers from our Sizing & Installation guide. Read the guide →
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
Adjustable spotlights on gooseneck arms let you aim light exactly where you need it.
A 2- or 3-head pendant with articulating cone shades and gold-rimmed details. Mounts to flat ceilings with supplied cables up to 70.9″ long. Integrated warm LED (3000K) casts focused task light or ambient accent light across kitchen islands, dining tables, and galleries. Check your ceiling: flat installation only—sloped ceilings require workaround.



Each shade pivots independently so you direct light to your work surface or accent zone, not fixed in one direction.
No bulbs to buy or replace. 3000K light stays on for years. Plug into any standard wall switch.
Cone shades trimmed in gold. Pairs with mid-century and contemporary tables alike.
Yes. Position the canopy centered above your island and adjust cable length so the shades hang 24–30 inches above the counter. Use the pivoting heads to light your prep zone and seating area.
No. This fixture is hardwired for flat ceiling installation only. If your ceiling is sloped, you'll need to move the canopy to the nearest flat soffit or consult an electrician about adapter solutions.
Each cone shade is mounted on a flexible gooseneck arm. Loosen the shade slightly and pivot the arm to point light where you need it, then tighten gently.
No. The LED is integrated into the fixture and is not user-replaceable. It is rated for several years of continuous use.
Downloads
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
Complete the set
Same footprint, same finish palette — a run reads as one composition.


Staggered set — same footprint, centres level on the wall
2 heads L 11.8″ x W 5.1″ x H 9.4″Black · Warm Light
$157.00
3 heads L 19.7″ x W 5.1″ x H 9.4″Black · Warm Light
$185.00
Set of 2, one of each height · $342.00 · one finish
Added — the set is in your cart.
Compare
This piece
Orrin Spotlight Pendant Light
|
Melt Pendant Light
GlassView → |
Nelson Bubble Pendant Lamp C
View → |
Melt Round Pendant System
GlassView → | |
|---|---|---|---|---|
| Price | $157.00 – $185.00 | $130.00 – $479.00 | $223.00 – $515.00 | $500.00 – $2,118.00 |
| Sizes | 2 · 2 heads L 11.8″ x W 5.1″ x H 9.4″ / 3 heads L 19.7″ x W 5.1″ x H 9.4″ | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 9 · Model C Dia 30cm x H 30cm / Model D Dia 28cm x H 40cm / Model E Dia 30cm x H 28cm | 7 · 3 heads (28cm*2 / 5 heads (28cm*5 / 5 heads (28cm*3 |
| Finish × glass | Black / White (2) | Red / Gold / Silver / Smoke gray (4) | White (1) | Rose Gold / Gold / Smoky gray / Silver (4) |
| Light & dimming | Warm Light | See specifications | See specifications | See specifications |
| Rating | New | ★ 4.57 (77) | ★ 4.52 (64) | ★ 4.73 (37) |
The Orrin family
Finish the room in one material — a pendant over the bedside, a chandelier over the table.