Bedside pair
One each side of the bed, centre about 60″ from the floor so the glass sits above the headboard. Taller styles read best here.
Pair · most bedrooms use two
Rayonshine
Kurtz Wall Light
Size:Dia 30cm x H 40cm / Dia 11.8” x H 15.7“
Color:Beige & White
Kelvin Range:Warm Light
7 in 10 wall-light orders are for two or more
How manyMost wall lights here are ordered in pairs
A pair flanks a bed, a mirror or a doorway; a run of three lights a hallway or stair. Mixing heights? Build a staggered set ↓
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Kurtz Wall Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 30cm x H 40cm / Dia 11.8” x H 15.7“
Color:Beige & White
Kelvin Range:Warm Light
Quantity:
Size:Dia 30cm x H 40cm / Dia 11.8” x H 15.7“
Color:Beige & White
Kelvin Range:Warm Light
Quantity:
Plan the wall
Where it goes, how high, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Hallway & stair run
Mix the heights — same footprint and finish, so a staggered run reads as one composition. Keep centres level at about 66″.
Set of 3 · one wall switch, equal spacing
Vanity pair
Sconces at eye level, 28–36″ apart, either side of the mirror. This fixture is IP20 (dry rooms only) — for a bathroom choose a damp-rated sconce.
01Overview
Hardwired travertine wall sconce with integrated LED; 30cm diameter, 10W warm light.
A 12-inch-wide circular wall sconce in natural travertine stone with white acrylic diffuser—substantial enough to anchor a bedroom or hallway without dominating the wall. Delivers soft 3000K warm light at 10W, bright enough for task lighting or ambient mood. Install in bedrooms, entryways, or living rooms; verify your wall can support hardwired installation before ordering.
02Gallery
03Materials & Craft
Travertine with acrylic diffuser
Natural stone paired with frosted acrylic to scatter light evenly. Each piece's travertine pattern is unique.
Integrated LED, 10W
No bulb to buy or replace. Warm 3000K output; not dimmable with standard wall dimmer switches.
Hardwired installation
Requires wiring into your electrical box. Not a plug-in or battery model.
04Size
Overall11.8" diameter × 15.7" height (30cm × 40cm)
Light output10W integrated LED, 3000K warm white
VoltageAC 110–240V
05Dimensions
06Specifications
MaterialTravertine stone body, white acrylic diffuser
Socket or Light sourceIntegrated LED (non-replaceable)
Recommended bulb or Kelvin3000K warm light (included); 4500K and 6000K variants available
VoltageAC 110–240V
Power10W
SwitchStandard on/off household switch; not compatible with dimmer switches
Cord or CableHardwired; no cord
EnvironmentIndoor use only (IP20 rating, not waterproof)
CareWipe travertine with a soft, dry cloth; travertine patterns vary naturally between units
07Downloads
08Questions
Can I use this with a dimmer switch?
No. The LED is fixed brightness only. Contact support before purchase if you need dimmable functionality.
Is this a plug-in sconce?
No. This is hardwired directly into your wall electrical box. You'll need an electrician for installation.
Will the travertine pattern match the photo?
No. Natural stone patterns vary. Your fixture will differ from product images.
What if I want a different color temperature?
This listing is 3000K warm light. 4500K (neutral) and 6000K (cool) variants are available separately.
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Kurtz Wall Light next to this year's other best-sellers.
This piece
Kurtz Wall Light
Travertine | 
Ceto Wall Light
GlassView → | 
Bubble Wall Sconce
WoodView → | 
Serge Mouille Wall Sconce
MetalView → | |
|---|---|---|---|---|
| Price | $281.00 | $158.00 – $257.00 | $305.00 | $185.00 – $390.00 |
| Sizes | 1 · Dia 30cm x H 40cm | 3 · Style A / Style B / Style C | 4 · Dia 28cm x H 40cm / Dia 30cm x H 30cm / Dia 30cm x H 28cm | 5 · L 60cm x H 40cm / L 80cm x H 40cm / L 120cm x H 40cm |
| Finish × glass | Beige & White (1) | Gold + Clear / Gold + Smoked / Gold + Milk white / Black + Clear / Black + Smoked / Black + Milk white (6) | White (1) | Black / White (2) |
| Light & dimming | Warm Light | Warm Light / Triac Warm Dimming | See specifications | See specifications |
| Rating | ★ 4.5 (20) | ★ 4.74 (78) | ★ 4.71 (42) | ★ 4.76 (46) |
The Kurtz family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.