Bedside pair
One each side of the bed, centre about 60″ from the floor so the glass sits above the headboard. Taller styles read best here.
Pair · most bedrooms use two
Rayonshine
Brias Alabaster Wall Sconce
Size:Dia 10cm x H 17cm / ∅ 3.9″ x H 6.7″
Color:Beige & White
7 in 10 wall-light orders are for two or more
How manyMost wall lights here are ordered in pairs
A pair flanks a bed, a mirror or a doorway; a run of three lights a hallway or stair. Mixing heights? Build a staggered set ↓
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Brias Alabaster Wall Sconce in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 10cm x H 17cm / ∅ 3.9″ x H 6.7″
Color:Beige & White
Quantity:
Size:Dia 10cm x H 17cm / ∅ 3.9″ x H 6.7″
Color:Beige & White
Quantity:
Plan the wall
Where it goes, how high, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Hallway & stair run
Mix the heights — same footprint and finish, so a staggered run reads as one composition. Keep centres level at about 66″.
Set of 3 · one wall switch, equal spacing
Vanity pair
Sconces at eye level, 28–36″ apart, either side of the mirror. This fixture is IP20 (dry rooms only) — for a bathroom choose a damp-rated sconce.
01Overview
Travertine and alabaster wall sconce with warm glow; hardwired; each stone base unique.
A sculptural wall sconce pairing a textured travertine base with translucent alabaster sphere, reads intimate in tight spaces like bathrooms and hallways. Casts soft ambient light suitable for accent lighting rather than task work. Install in bedrooms, powder rooms, or living room niches; confirm your wall can accept hardwired fixtures before purchase.
02Gallery
03Materials & Craft
Travertine & Alabaster
Raw stone base with translucent sphere. Each piece has unique natural veining; no two are identical.
Warm Ambient Glow
Soft indirect light from alabaster diffuser. Works as accent, not primary illumination.
Hardwired Installation
Connects to wall switch; requires electrical rough-in. Not a plug-in or battery option.
04Size
Overall Dimensions3.9″ wide × 6.7″ tall
Base Diameter10 cm (≈ 4″) for wall space needed
Light SourceG9 base bulb (not included)
05Dimensions
06Specifications
MaterialTravertine stone base, Spanish alabaster sphere, metal fittings
Socket or Light sourceG9 base (halogen or LED compatible)
Recommended bulb or KelvinG9 warm white (2700K–3000K typical for ambient effect)
VoltageAC 110–240V
PowerSee bulb wattage (G9 bulbs typically 25–40W)
SwitchHardwired to external wall switch
Cord or CableHardwired; no cord
EnvironmentIndoor only; IP20 (not waterproof)
CareWipe stone with soft dry cloth; avoid water and harsh cleaners
07Downloads
08Questions
Is this a plug-in wall sconce?
No. It is hardwired to your wall electrical box and controlled by an external switch. Requires professional installation.
Do you include a bulb?
No. It takes a G9 base bulb, sold separately.
Will the stone color or pattern be the same on my fixture?
No. Each travertine and alabaster piece has unique natural veining; your fixture will be one-of-a-kind.
Can I use this in a bathroom or powder room?
Yes, away from direct water spray. It is not waterproof (IP20), so keep it away from shower spray and wet sink areas.
Downloads
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Brias Alabaster Wall Sconce next to this year's other best-sellers.
This piece
Brias Alabaster Wall Sconce
Alabaster · Marble · Travertine · Stone | 
Ceto Wall Light
GlassView → | 
Bubble Wall Sconce
WoodView → | 
Serge Mouille Wall Sconce
MetalView → | |
|---|---|---|---|---|
| Price | $165.00 | $158.00 – $257.00 | $305.00 | $185.00 – $390.00 |
| Sizes | 1 · Dia 10cm x H 17cm | 3 · Style A / Style B / Style C | 4 · Dia 28cm x H 40cm / Dia 30cm x H 30cm / Dia 30cm x H 28cm | 5 · L 60cm x H 40cm / L 80cm x H 40cm / L 120cm x H 40cm |
| Finish × glass | Beige & White (1) | Gold + Clear / Gold + Smoked / Gold + Milk white / Black + Clear / Black + Smoked / Black + Milk white (6) | White (1) | Black / White (2) |
| Light & dimming | See specifications | Warm Light / Triac Warm Dimming | See specifications | See specifications |
| Rating | New | ★ 4.74 (78) | ★ 4.71 (42) | ★ 4.76 (46) |
The Brias family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.