
































































Rayonshine
Horizontal Serge Mouille Ceiling Lamp A
Size
Color
Choose options
Size
Color
Size
Color
A sculpture first — a lamp second. Three steel arms reach into the room, each ending in a quiet diffuser of light.
The Three Arm Ceiling Lamp (1958) is a suspended interpretation of the original Three Arm Floor Lamp, preserving the dynamic, sculptural aesthetic of the mid-century original. Every lighting solution in the family carries the designer's signature hardware: the way the arms meet the diffusers, the washer-and-hex-screw fittings, the quiet form of the reflector, and the refined geometry of the steel tubes. Offered in black or white lacquered finishes with warm brass ball joints, it anchors a dining room, hallway, or kitchen island with quiet presence.
| Dimensions | 3heads: L 150cm x H 50cm / L 59" x H 19.7" 6heads: L 220cm x H 50cm / L 86.6" x H 19.7" Ceiling canopy: Ø 12 × H 21 cm / Ø 4.7″ × H 8.3″ |
| Weight | 3heads ≈ 5 kg · 6heads ≈ 10 kg |
| Packing size | 3heads: L 130 × W 36 × H 23 cm |
| Materials | Lacquered aluminium, steel, brass ball joints |
| Finishes | Black · White (body & shade match) |
| Socket | E26 or E27 · 18W max per bulb |
| Bulbs | Not included · 3 bulbs (3heads) or 6 bulbs (6heads) |
| Dimmable | Yes — with dimmable bulb and compatible dimmer switch |
| Switch | Works with standard household switches and dimmers |
| Voltage | AC 110–240V, full-range |
| Wiring | Hardwired (ceiling mount) |
| IP rating | IP20 — indoor use only, not waterproof |
| Environment | Indoor |
| Certifications |
North America Europe Australia Middle East
|
- Hardwired ceiling installation — a licensed electrician is recommended for safe mounting, wiring, and canopy attachment.
- Fits a standard ceiling junction box. All mounting hardware and the canopy plate (Ø 12 × H 21 cm) are included in the box.
- Install 3 bulbs (3heads version) or 6 bulbs (6heads version), E26 or E27 base, 18W maximum per arm. Warm white (2700K–3000K) is recommended for the most flattering light.
- For dimming, pair a dimmable LED bulb with a compatible TRIAC dimmer switch. The lamp itself supports full-range AC 110–240V worldwide.
- Check bulb orientation before powering on — the conical reflectors direct light downward, so use standard (not reverse-base) bulbs for the best effect.
Are bulbs included?
Is the lamp dimmable?
What's the difference between the 3heads and 6heads versions?
Can I use Three Arm on both 110V and 220V circuits?
Can I install it in a bathroom or covered outdoor area?
Will the brass ball joints tarnish over time?
Do I need a professional electrician to install this?
How do I clean the lamp?
the line,
the light.
Hand-formed steel arms and directional shades — a mid-century silhouette that draws light like a line in the air.
Explore →Light, drawn rather than hung.
Not just illuminating a room, but sculpting it. Every single angle is a masterpiece.
4 Reasons You'll Love This Light
Directional light
Each shade pivots to aim a soft, focused pool of light exactly where it is needed — task, accent, or wash.
Articulated & adjustable
Jointed arms rotate and reposition, so a single fixture adapts to many rooms, walls, and moods.
Sculptural silhouette
Slender black arms and organic shades read as a piece of art, even when the light is off.
Made to last
Hand-welded joints, balanced counterweights, and a matte finish built for decades of daily use.
One fixture, three directions



Mastered balance. Steel meets skill.
01 · Shaping the arm
02 · Welding the joint
03 · Forming the shade
04 · Matte-black finish
05 · Balancing and wiring- 01
Steel Rod Forming
Solid steel rod is measured, cut, and bent into the long, tapering arms that define the silhouette.
- 02
Joints & Welding
Pivots and counterweights are welded in place, giving each arm a smooth, deliberate range of motion.
- 03
Shaping the Shade
The organic diffuser is spun and trued so light gathers and throws in one clean direction.
- 04
Matte-Black Finish
Frame and shade exterior are finished in deep matte black; the inner shade stays pale to warm the glow.
- 05
Balanced & Assembled
Each piece is assembled, wired, and hand-balanced so every joint holds its pose without drifting.

Craft & Control.
| Structure | Lacquered aluminium & steel, brass ball joints |
|---|---|
| Shade | Elongated conical reflector (directional downlight) |
| Finish | Matte black lacquer · visible washer & hex-screw hardware |
| Light source | E26 / E27 · 18W max per head · bulb not included |
| Color temp. | 2700–3000K recommended (by bulb) |
| Adjustability | Rotating arms + independently rotating shades |
| Mounting | Ceiling / wall / floor (by form) |
| Rating | Dry-rated, indoor · made in China |
Series-typical figures; exact values vary by size and head count.
It's all in the details
Define your corner
| Feature | Horizontal Serge Mouille Ceiling Lamp A | Leaning Serge Mouille Ceiling Lamp B | Serge Mouille Wall Sconce | Serge Mouille Floor Lamp |
|---|---|---|---|---|
| Mount | Ceiling | Ceiling | Wall | Floor |
| Arms / heads | 3 | 5 | 1–2 | 1 or 3 |
| Size (L×H) | L150 × H65 cm | L190 × H70 cm | arm 60–120 cm | Ø45×H160 · Ø145×H218 cm |
| Best for | Dining / hall | Open room | Bedside / hall | Reading · statement |
| Adjustable | Yes | Yes | Yes · 90° | Yes |
Sizes are nominal; bulbs (E26/E27, 18W max) not included · made in China.
And Much More
Explore Our Collections
Shop with Confidence – Guaranteed Support
At RayonShine, we prioritize your shopping experience by offering high-quality products, secure transactions, and reliable after-sales support. With our trusted payment methods, professional customer service, and hassle-free return policies, you can shop with confidence knowing that we’ve got you covered every step of the way. Your satisfaction is our commitment!











