Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Bubble Pendant Lamp C
Model:Model C Dia 30cm x H 30cm
Colour:White
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Bubble Pendant Lamp C in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Frequently bought together
This item: Bubble Pendant Lamp CModel C Dia 30cm x H 30cm / White
$223.00
Choose options
Model:Model C Dia 30cm x H 30cm
Colour:White
Quantity:
Model:Model C Dia 30cm x H 30cm
Colour:White
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01 Overview A 1952 Silhouette
A self-tensioning wire skeleton wrapped in translucent skin — a pendant that glows like a cocoon and floats as if weightless.
Inspired by an iconic 1952 design, the Nelson Bubble Pendant is built around a lightweight steel wireframe that holds its distinctive silhouette under natural tension. A network of interconnected wires forms the signature crisscross pattern, wrapped in a soft, translucent covering that emits an organic, evenly diffused glow. Offered in seven sculptural shapes and nine size variants, it scales from a single statement piece to layered clustered installations — from dining tables to stairwells to hospitality spaces.
02 Signature Craft Wire & Skin
Click to enlarge
How it's made. Each Bubble begins as a lightweight steel wire armature that tensions into a self-supporting silhouette. A crisscross weave of wires forms the pendant's signature geometry, and a fine translucent skin — mulberry silk over the wire network — diffuses the bulb into a soft, honeyed, organic glow.
03 Models Seven Shapes · Nine Sizes
Custom Sizing
Any size, any shape
We are the manufacturer. Non-standard sizes, bespoke silhouettes, and custom drop lengths are available on request — ideal for stairwells, atria, and architectural commissions.
Trade Program
Up to 50% off for wholesale
Wholesale and trade customers receive volume pricing on standard and custom orders. Please enquire with quantities, delivery country, and lead-time requirements.
04 Materials & Craft Three Pillars
Self-Tensioning Wireframe
Lightweight steel wires are formed and tensioned into a stable, self-supporting silhouette. No internal scaffold is required — the geometry holds itself.
Translucent Skin
Mulberry silk is wrapped over the wire armature, forming a soft, luminous envelope that diffuses the bulb into an organic, evenly distributed glow.
Cluster-Ready
Designed for layered, multi-pendant compositions. Mix sizes and shapes to build dynamic installations over dining tables, stairwells, and hospitality spaces.
05 Product Notes At a Glance
Bulb Not Included
E26 or E27 base · sold separately
Dimmable Ready
Use a dimmable bulb + dimmer switch
Flat Ceilings Only
Not compatible with sloped ceilings
06 Specifications Technical Data
| Models & sizes | Model C: Ø 30 × H 30 cm / Ø 11.8″ × H 11.8″ Model D: Ø 28 × H 40 cm / Ø 11″ × H 15.8″ Model E: Ø 30 × H 28 cm | Ø 40 × H 36 cm Model F: Ø 45 × H 37 cm / Ø 17.7″ × H 10.6″ Model G: Ø 35 × H 32 cm | Ø 45 × H 42 cm Model H: Ø 50 × H 38 cm / Ø 19.7″ × H 14.9″ Model I: Ø 40 × H 42 cm / Ø 15.8″ × H 16.5″ |
| Materials | Mulberry silk, steel wire, metal hardware |
| Finish | White (body & shade) |
| Socket | E26 or E27 |
| Bulb included | No — sold separately |
| Dimmable | Yes — with dimmable bulb and compatible dimmer switch |
| Switch | Works with standard household switches and dimmers |
| Suspension | 150 cm / 59″ cable (custom lengths available on request) |
| Voltage | AC 110–240V, full-range |
| Wiring | Hardwired (ceiling mount) |
| Ceiling | Flat ceilings only — not compatible with sloped ceilings |
| IP rating | IP20 — indoor use only, not waterproof |
| Environment | Indoor |
| Customization | Custom sizes and shapes available on request |
| Certifications |
North America Europe Australia Middle East
|
Indoor use only. IP20-rated for dry interior environments — not suitable for bathrooms, wet rooms, or outdoor installations. Keep the silk shade away from moisture and direct heat sources.
07 Installation Setup Notes
- Hardwired ceiling installation — a licensed electrician is recommended for safe mounting, wiring, and grounding.
- Flat ceilings only. The ceiling rose requires a level mounting plane — sloped or vaulted ceilings are not compatible without a specialised adapter (not included).
- The standard suspension cable is 150 cm (59″) long. Longer or shorter drops can be supplied on request — ideal for stairwells, double-height rooms, or low-ceiling installations.
- Install an E26 or E27 bulb (sold separately). A warm white LED bulb (2700K–3000K) gives the most flattering, honeyed glow through the silk shade. Low-wattage LEDs (5–8 W) are recommended to keep heat output low on the silk skin.
- For dimming, pair a dimmable LED bulb with a compatible TRIAC dimmer switch.
- Handle the shade with clean, dry hands during installation — avoid pressing on or denting the silk skin, as the wire tension gives the silhouette its shape.
08 Questions Frequently Asked
How do I choose between the different models?
Each model letter (C, D, E, F, G, H, I) is a different silhouette — some ball-shaped, some elongated, some flatter and saucer-like. Models E and G are offered in two sizes. For a single statement piece over a table, Models F, H, and the larger E/G work well. For clusters or hallways, mix smaller models (C, D, E small) at varying drop heights. We're happy to advise if you share your space.
Can you make custom sizes or shapes?
Yes. As the manufacturer, we can produce non-standard sizes, bespoke silhouettes, and custom drop lengths. Please enquire with your specifications — dimensions, quantity, target ceiling height, and delivery country — and we'll confirm feasibility and lead time.
Do you offer a wholesale or trade discount?
Yes. Wholesale and trade customers receive up to 50% off depending on volume. Please contact us with your quantities and project details for a formal quote.
Are bulbs included?
No. The Bubble takes a standard E26 or E27 screw-base bulb, sold separately. We recommend a warm white dimmable LED (2700K–3000K, 5–8W) for the most flattering glow and the lowest heat output on the silk shade.
Is it dimmable?
Yes. The lamp works with standard household switches and is compatible with dimmers. Install a dimmable LED bulb and pair it with a TRIAC-compatible dimmer switch. The lamp itself does not have a built-in dimmer.
Can I install it on a sloped ceiling?
No. The Bubble is designed for flat ceilings only. A sloped or vaulted ceiling would require a specialised adapter, which is not included. For sloped installations, please consult a specialist electrician.
Can I request a longer or shorter suspension cable?
Yes. The standard cable is 150 cm (59″), but custom lengths are available on request — ideal for stairwells, high ceilings, or low ceilings. Please specify your preferred length when ordering.
Can I use the Bubble on both 110V and 220V circuits?
Yes. The lamp supports full-range AC 110–240V and is certified for use in North America, Europe, Australia, and the Middle East — no additional transformer required. Pair it with bulbs rated for your local voltage.
Can I install it in a bathroom or outdoors?
No. The Bubble is IP20-rated for dry indoor use only. The silk shade is sensitive to moisture — keep it away from bathrooms, wet rooms, saunas, covered porches, and any outdoor environment. Also avoid installing directly above steam-producing appliances.
How do I clean the shade?
Gently dust the silk surface with a very soft dry brush or a feather duster — a camel-hair paintbrush works well. Do not use water, cleaning sprays, or damp cloths, as these can stain or warp the silk. Handle with clean, dry hands, and avoid pressing on the shade.
Do I need a professional electrician to install this?
Yes, we strongly recommend a licensed electrician. The lamp is hardwired, needs a correctly mounted ceiling junction box, and must be properly grounded. A professional will also ensure correct dimmer compatibility if you plan to use one.
09 Downloads Spec · Install
◇
1952 Heritage Design
◉
7 Shapes · 9 Sizes
✦
Custom Sizing
◈
Trade Program
Downloads
Rayonshine Collection — Nelson Bubble, Silk Edition
Steel bends.
Steel bends.
Silk settles.
Light glows.
Six silhouettes, one construction: bare wire spun into shape, wrapped in a single length of silk fiber, cured until it holds its own light.
Shop the Collection →
6 Silhouettes
Wire & Silk-Fiber
Dimmable
See the shape catch the light
The Method
One wire, wound by hand
There's no mold in this collection, and no two shades come out quite the same. A shape starts as bare wire and ends as something that holds light like paper holds ink — soft at the edges, structured underneath.
It's the same logic mid-century designers reached for: let the material do the work, and don't hide how a thing is made. What you see on the outside is what's actually holding it up.
The winding is where the hand shows. That's the part we didn't try to make perfect.
Craftsmanship
From wire to warm light — four steps
Spin the frame
Bare steel wire, spun on a jig until it locks into the shape's exact curve — no mold, no shortcuts.
Wind the fiber
A single length of silk-fiber cord, wound over the frame edge to edge in one unbroken pass by hand.
Cure the skin
Heat sets the wound fiber into a firm, self-supporting shell — it holds its shape with the frame removed.
Fit and finish
Socket, canopy, and hardware go on by hand, then every shade is checked for an even glow.
Materials
What it's made of
A steel wire frame wrapped in a single length of silk-fiber cord, cured into a firm shell that holds its own shape. Canopy and hardware finished in matte black or brushed brass.
Works with any standard dimmer switch. Built for indoor use only.
Care
Keeping it right
- Dust with a soft, dry brush or a hair dryer set to cool — skip the damp cloth.
- Keep it away from moisture and high humidity.
- Stay at or under the rated wattage to protect the fiber shell.
- Carry it by the frame, never by the shell itself.
The Design
A shape from 1952
Back in 1952, this shape got its glow from a plastic webbing sprayed straight onto a wire frame — a fast process built for a soft, even light. We kept the wire, but swapped the spray for something slower: mulberry silk fiber, wound by hand. Same silhouette, same idea, just a warmer surface under your hand and a longer process behind it.
Choose Your Silhouette
Six shapes, one language
Pendant
Saucer Profile
Nelson Bubble Pendant Lamp A
Wide and low — this shape spreads a soft, even wash of light across whatever sits below it.
Pendant
Ellipse Profile
Nelson Bubble Pendant Lamp B
Taller and narrower, with a lower drop — reads well over a staircase or a narrow dining table.
Pendant
Ball Profile
Nelson Bubble Pendant Lamp C
A true sphere — light spreads evenly no matter which side of the room you're standing in.
Suspension
Multi-Arm Suspension
Taraxacum Suspension Lamp
Several arms of wire and fiber radiating from one core — the largest, most sculptural piece in the collection.
Wall
Half-Bubble, Wall-Mount
Nelson Wall Sconce
The same wire-and-silk build, flattened against a back plate — made for hallways and tighter walls.
Table
Tripod Base
Nelson Table Lamp
The same shade set on a slim tripod base — sized for a console table or a nightstand.
Questions
Before you order
What's the silk-fiber shell actually made of?
A single length of fiber cord, wound over a steel wire frame and cured into a firm, self-supporting shell — the same idea as the mid-century originals, built with a more durable fiber blend.
Is it dimmable?
Yes — any standard dimmer switch works. A warm-dim LED bulb will keep the shell's color true at low output.
How is Pendant A different from B and C?
Same build, three profiles: A is wide and low (Saucer), B is taller and narrower (Ellipse), C is a true sphere (Ball). Pick based on how much spread you want and how much ceiling height you're working with.
Can it hang outdoors or in a bathroom?
No — this collection is built for indoor, dry-location use only. The fiber shell isn't sealed against moisture.
What's the lead time?
Get in touch for current lead times — every shade in this series is wound to order.
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Bubble Pendant Lamp C next to this year's other best-sellers.
This piece
Bubble Pendant Lamp C
| 
Melt Pendant Light
GlassView → | 
Melt Round Pendant System
GlassView → | 
Gregg Pendant Lamp
GlassView → | |
|---|---|---|---|---|
| Price | $223.00 – $515.00 | $130.00 – $479.00 | $500.00 – $2,118.00 | $138.00 – $242.00 |
| Sizes | 9 · Model C Dia 30cm x H 30cm / Model D Dia 28cm x H 40cm / Model E Dia 30cm x H 28cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) | 3 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm |
| Finish × glass | White (1) | Red / Gold / Silver / Smoke gray (4) | Rose Gold / Gold / Smoky gray / Silver (4) | White (1) |
| Light & dimming | See specifications | See specifications | See specifications | Warm White / Cool White |
| Rating | ★ 4.52 (64) | ★ 4.57 (77) | ★ 4.73 (37) | ★ 4.72 (46) |
The Bubble family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.