Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Robern Travertine Pendant Light
Size:Dia 20cm x H 15cm
Color:Beige
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Robern Travertine Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 20cm x H 15cm
Color:Beige
Quantity:
Size:Dia 20cm x H 15cm
Color:Beige
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Travertine disc pendant with walnut cap casts warm light over small tables and bedside spots.
A 20cm-diameter pendant with a textured beige travertine shade and slim wood suspension. The exposed bulb throws a concentrated pool of warm light directly below—ideal for reading or intimate dining. Check your ceiling type before ordering: this hardwired fixture installs on flat ceilings only, not sloped.
02Gallery
03Materials & Craft
Travertine and walnut construction
Hand-finished stone disc pairs with a walnut wood cap. Each piece's travertine pattern is unique.
Exposed bulb design
E26/E27 socket sits visible below the shade. Light pools directly downward without diffusion.
Long suspension cord
Ships with 170cm (66.9″) cable. Specify custom lengths when ordering if needed.
04Size
OverallDia 20cm / 7.9″ × H 15cm / 5.9″
Shade materialBeige travertine
Cap and suspensionWalnut wood
Cord length170cm (66.9″) standard
05Dimensions
06Specifications
MaterialTravertine stone disc, walnut wood cap
Socket or Light sourceE26 or E27 base (bulb not included)
Recommended bulb or KelvinSee photos for warm light reference; bulb selection determines color temperature
VoltageAC 110–240V
PowerDepends on bulb wattage
SwitchCompatible with ordinary household switches and dimmers
Cord or Cable170cm (66.9″) suspension cable included; custom lengths available on request
EnvironmentIndoor only. Hardwired installation. IP rating 20 (not waterproof).
CareDust travertine gently. Avoid moisture. Travertine patterns vary by product.
07Downloads
08Questions
Can I plug this in or does it need hardwiring?
This is hardwired only—requires connection to your home's electrical system by an electrician.
Will this work on a sloped ceiling?
No. This fixture is compatible with flat ceilings only. Sloped or cathedral ceilings require different mounting hardware.
What size bulb does it take and is one included?
E26 or E27 base bulb (standard US or international). Bulb is not included; you choose the wattage and color temperature.
Can I adjust the height of the cord?
Yes. The fixture ships with 170cm of cable. You can request a different length when you order.
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Robern Travertine Pendant Light next to this year's other best-sellers.
This piece
Robern Travertine Pendant Light
Travertine · Wood | 
Molten Glass Pendant Light
GlassView → | 
Molten Glass Round Pendant System
GlassView → | 
Gregg Pendant Lamp
GlassView → | |
|---|---|---|---|---|
| Price | $158.00 | $130.00 – $479.00 | $540.00 – $2,118.00 | $138.00 – $242.00 |
| Sizes | 1 · Dia 20cm x H 15cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) | 3 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm |
| Finish × glass | Beige (1) | Red / Gold / Silver / Smoke gray (4) | Rose Gold / Gold / Smoky gray / Silver (4) | White (1) |
| Light & dimming | See specifications | See specifications | See specifications | Warm White / Cool White |
| Rating | New | ★ 4.57 (77) | ★ 4.73 (37) | ★ 4.72 (46) |
The Robern family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.