Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Herda Travertine Pendant Lamp
Size:Dia 12cm x H 22cm
Color:Walnut Color & Beige
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Herda Travertine Pendant Lamp in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 12cm x H 22cm
Color:Walnut Color & Beige
Quantity:
Size:Dia 12cm x H 22cm
Color:Walnut Color & Beige
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Travertine pendant with walnut wood accent casts warm, textured light in bedrooms, entryways, or over nightstands.
A single alabaster pendant light with a 4.7" diameter and 8.7" cone—reads intimate in scale, perfect for low ceilings or tight spaces. The travertine body diffuses warm light evenly across a small radius without glare. Mount it over a nightstand, in a hallway, or above a vanity; verify your ceiling is flat before ordering (not compatible with sloped surfaces).
02Gallery
03Materials & Craft
Travertine body
Premium yellow cave stone with natural pitting and texture. Each piece varies slightly in pattern.
Walnut wood collar
Separates the stone shade from the wood-finish decorative sphere at top. Available in walnut or beige finish.
Dimmable, standard bulb
Takes E26 or E27 base bulb (not included). Works with household dimmers and regular switches.
04Size
OverallDiameter 4.7" (12 cm) / Height 8.7" (22 cm)
Shade openingTop aperture fits standard bulb socket
Cord length66.9" (170 cm) standard; custom lengths available
05Dimensions
06Specifications
MaterialTravertine (yellow cave stone); walnut or beige wood accent
Socket or Light sourceE26 or E27 bulb base (bulb not included)
Recommended bulb or KelvinSee photos; warm white (2700K) suits the stone tone
VoltageAC 110–240 V (works worldwide)
PowerDepends on bulb selected
SwitchCompatible with standard household switches and dimmers
Cord or Cable170 cm (66.9") brown suspension cord; specified lengths available on request
EnvironmentIndoor only; hardwired installation
CareDust travertine surface gently; avoid moisture (IP20, not waterproof)
07Downloads
08Questions
Can I use this as a plug-in pendant light?
No. This fixture is hardwired to your ceiling; it is not a plug-in pendant. Requires professional or competent DIY installation.
Do the travertine patterns match the photos?
No. Travertine is a natural stone; pitting and color vary significantly from piece to piece. Your fixture will differ from all product images shown.
What kind of bulb do I need?
Any bulb with an E26 or E27 base. The fixture does not come with a bulb. We recommend warm white (2700K) to complement the stone.
Can I install this on a sloped or vaulted ceiling?
No. This fixture is only compatible with flat ceilings. Check your installation surface before ordering.
Downloads
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Herda Travertine Pendant Lamp next to this year's other best-sellers.
This piece
Herda Travertine Pendant Lamp
Travertine · Wood | 
Molten Glass Pendant Light
GlassView → | 
Molten Glass Round Pendant System
GlassView → | 
Gregg Pendant Lamp
GlassView → | |
|---|---|---|---|---|
| Price | $164.00 | $130.00 – $479.00 | $500.00 – $2,118.00 | $138.00 – $242.00 |
| Sizes | 1 · Dia 12cm x H 22cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) | 3 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm |
| Finish × glass | Walnut Color & Beige (1) | Red / Gold / Silver / Smoke gray (4) | Rose Gold / Gold / Smoky gray / Silver (4) | White (1) |
| Light & dimming | See specifications | See specifications | See specifications | Warm White / Cool White |
| Rating | New | ★ 4.57 (77) | ★ 4.73 (37) | ★ 4.72 (46) |
The Herda family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.