Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Sean Pendant Light
Size:Dia 15cm x H 14cm
Color:Black
Kelvin Range:Warm Light
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Sean Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 15cm x H 14cm
Color:Black
Kelvin Range:Warm Light
Quantity:
Size:Dia 15cm x H 14cm
Color:Black
Kelvin Range:Warm Light
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Travertine pendant with integrated LED hangs on nearly invisible cord, casts warm light.
A 15cm dual-dome pendant in volcanic travertine stone with warm 3000K integrated LED. The fixture hangs low and reads as a sculptural focal point above a nightstand, desk, or reading chair—light output stays soft and focused below. Before ordering: flat ceilings only, and travertine veining varies piece to piece.
02Gallery
03Materials & Craft
Travertine + LED
Porous volcanic stone with fleck texture. Integrated 10W LED, warm 3000K, no bulb needed.
Cord suspension
Ships with 150cm cable; custom lengths available on request. Nearly invisible when lit.
Wired, dimmable
Hardwired installation. Works with standard household dimmer switches. Not a plug-in pendant.
04Size
OverallDia 15cm × H 14cm (∅ 5.9″ × 5.5″)
Power draw10W
Ceiling clearanceFlat ceilings only; not compatible with sloped or cathedral ceilings
05Dimensions
06Specifications
MaterialTravertine stone, metal canopy
Socket or Light sourceIntegrated LED (non-replaceable)
Recommended bulb or KelvinWarm Light 3000K (standard); Neutral 4500K and Cool 6000K available by request
VoltageAC 110–240V
Power10W
SwitchCompatible with standard household switches and dimmers
Cord or Cable150cm (59″) suspension cable; custom lengths on request
EnvironmentIndoor only; IP20 rating (not waterproof)
CareWipe travertine gently when cool; avoid harsh cleaners. Travertine patterns vary naturally by piece.
07Downloads
08Questions
Is this a plug in pendant light?
No. It is hardwired directly to household current and requires professional installation. This is not a plug-in pendant.
Can I use this over a kitchen island?
Yes, if your ceiling is flat. It works well as pendant lighting over islands, desks, or reading areas. Sloped or cathedral ceilings are not compatible.
What color temperature does it come in?
Ships with warm light 3000K. Neutral 4500K and cool 6000K options are available; contact us to request before purchase.
Will my travertine pendant look exactly like the photos?
No. Travertine is a natural stone; veining and surface texture vary by piece. Each pendant is unique.
Downloads
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Sean Pendant Light next to this year's other best-sellers.
This piece
Sean Pendant Light
Travertine | 
Melt Pendant Light
GlassView → | 
Bubble Pendant Lamp C
View → | 
Melt Round Pendant System
GlassView → | |
|---|---|---|---|---|
| Price | $162.00 | $130.00 – $479.00 | $223.00 – $515.00 | $500.00 – $2,118.00 |
| Sizes | 1 · Dia 15cm x H 14cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 9 · Model C Dia 30cm x H 30cm / Model D Dia 28cm x H 40cm / Model E Dia 30cm x H 28cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) |
| Finish × glass | Black (1) | Red / Gold / Silver / Smoke gray (4) | White (1) | Rose Gold / Gold / Smoky gray / Silver (4) |
| Light & dimming | Warm Light | See specifications | See specifications | See specifications |
| Rating | New | ★ 4.57 (77) | ★ 4.52 (64) | ★ 4.73 (37) |
The Sean family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.