Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Maytoni Travertine Pendant Light
Size:L 120cm x H 8cm
Color:Beige
Kelvin Range:Warm Light
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Maytoni Travertine Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:L 120cm x H 8cm
Color:Beige
Kelvin Range:Warm Light
Quantity:
Size:L 120cm x H 8cm
Color:Beige
Kelvin Range:Warm Light
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Six travertine cylinders hang from a slim bronze rod, casting warm light across kitchen islands and dining tables.
A 47-inch pendant light with six natural stone shades suspended on thin wires for a floating, minimal look. The integrated LED emits warm 3000K light through beige travertine, creating soft ambient glow without glare. Mount it above a kitchen island, dining table, or work surface—confirm your ceiling accepts hardwired installation before ordering.
02Gallery
03Materials & Craft
Natural travertine shades
Each cylindrical shade is solid travertine stone. Patterns vary between pieces; photos show one example only.
Dark bronze metal rod
Slim suspension rod in walnut or black finish holds all six shades in balanced alignment.
Integrated LED, warm only
42W total power, 3000K warm white. Contact us if you need neutral (4500K) or cool (6000K) light instead.
04Size
Overall120cm L × 8cm H (47.2″ × 3.1″)
Fixture drop59″ standard cable (custom lengths upon request)
Power draw42W
05Dimensions
06Specifications
MaterialTravertine stone shades, metal rod and hardware
Socket or Light sourceIntegrated LED (non-replaceable)
Recommended bulb or Kelvin3000K warm white (fixed; neutral and cool available by custom order)
VoltageAC 110–240V
Power42W
SwitchCompatible with standard household wall switches
Cord or Cable150cm (59″) suspension cables included; custom lengths available
EnvironmentIndoor use only (IP20—not waterproof)
CareWipe travertine with a soft, dry cloth; avoid moisture and acidic cleaners
07Downloads
08Questions
Can I install this on a sloped or vaulted ceiling?
No. This fixture is hardwired for flat ceiling installation only. Sloped ceilings are not compatible.
Do all six travertine shades look identical?
No. Travertine patterns are natural and vary from piece to piece. The photo shown is one example.
What if I want cool or neutral white light instead of warm?
This standard variant ships in warm 3000K only. Contact us to discuss neutral (4500K) or cool (6000K) custom options before purchase.
How long are the suspension cables, and can I shorten them?
Standard cables are 59 inches (150cm). Request custom lengths before ordering. We cannot shorten or adjust after shipping.
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Maytoni Travertine Pendant Light next to this year's other best-sellers.
This piece
Maytoni Travertine Pendant Light
Travertine | 
Molten Glass Pendant Light
GlassView → | 
Molten Glass Round Pendant System
GlassView → | 
Gregg Pendant Lamp
GlassView → | |
|---|---|---|---|---|
| Price | $501.00 | $130.00 – $479.00 | $540.00 – $2,118.00 | $138.00 – $242.00 |
| Sizes | 1 · L 120cm x H 8cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) | 3 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm |
| Finish × glass | Beige (1) | Red / Gold / Silver / Smoke gray (4) | Rose Gold / Gold / Smoky gray / Silver (4) | White (1) |
| Light & dimming | Warm Light | See specifications | See specifications | Warm White / Cool White |
| Rating | New | ★ 4.57 (77) | ★ 4.73 (37) | ★ 4.72 (46) |
The Maytoni family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.