Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Destin Travertine Pendant Light
Size:Dia 10cm x H 14cm
Color:Walnut color & Beige
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Destin Travertine Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Choose options
Size:Dia 10cm x H 14cm
Color:Walnut color & Beige
Quantity:
Size:Dia 10cm x H 14cm
Color:Walnut color & Beige
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Kitchen island
One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.
Set of 3 · 450–600 lm each
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Travertine cylinder with walnut wood collar hangs 66.9″ of cable, takes standard E26/E27 bulbs.
A 3.9″-wide pendant in natural travertine stone with a warm wooden accent—compact enough for bedside tables, open shelving, or kitchen islands without dominating the space. The beige stone diffuses light softly downward; the interior opening casts a warm glow on surfaces below. Hardwired to ceiling, compatible with dimmer switches. Check your ceiling type before ordering: flat roofs only—not sloped.
02Gallery
03Materials & Craft
Travertine + wood pairing
Natural stone body with walnut wood connector piece. Each travertine shade varies in pattern and veining—no two are identical.
Suspension cable
Comes with 66.9″ (170cm) cord. Request custom lengths before purchase if your ceiling is higher or lower than standard.
Dimmable, no bulb included
Works with any standard E26 or E27 base bulb. Use a dimmable bulb if you want adjustable brightness. AC 110–240V.
04Size
OverallØ 3.9″ (10cm) × H 5.5″ (14cm)
Suspension cable66.9″ (170cm) standard; custom lengths available
Socket typeE26 or E27 base (standard household bulb)
InstallationHardwired to ceiling; flat roof only
05Dimensions
06Specifications
MaterialNatural travertine stone, walnut-colored wood connector
Socket or Light sourceE26 or E27 base—bulb not included
Recommended bulb or KelvinAny standard E26/E27 bulb; use dimmable bulb for brightness control
VoltageAC 110–240V
PowerDepends on bulb wattage selected
SwitchCompatible with standard household switches and dimmers
Cord or Cable170cm (66.9″) included; custom lengths available upon request
EnvironmentIndoor only. Not waterproof (IP20 rating).
CareWipe travertine gently with a dry cloth. Travertine patterns are natural and vary by piece.
07Downloads
08Questions
Can I install this on a sloped ceiling?
No. This fixture is compatible only with flat roof installation. Sloped or angled ceilings are not supported.
Is the bulb included?
No. You need to purchase a standard E26 or E27 base bulb separately. Most household incandescent, LED, or CFL bulbs work.
Will this work with a dimmer switch?
Yes, it's dimmer-compatible. Use a dimmable bulb (check the bulb packaging) to adjust brightness smoothly.
The cable is too long for my ceiling. Can I order a shorter one?
Yes. Request a custom cable length before purchase. Standard cable is 170cm (66.9″).
Downloads
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Destin Travertine Pendant Light next to this year's other best-sellers.
This piece
Destin Travertine Pendant Light
Travertine · Wood | 
Molten Glass Pendant Light
GlassView → | 
Molten Glass Round Pendant System
GlassView → | 
Gregg Pendant Lamp
GlassView → | |
|---|---|---|---|---|
| Price | $148.00 | $130.00 – $479.00 | $540.00 – $2,118.00 | $138.00 – $242.00 |
| Sizes | 1 · Dia 10cm x H 14cm | 4 · Dia 18cm / Dia 28cm / Dia 38cm | 7 · 3 heads (28cm*2 + 38cm*1) / 5 heads (28cm*5) / 5 heads (28cm*3 + 38cm*2) | 3 · Dia 15cm x H 13cm / Dia 23cm x H 23cm / Dia 31cm x H 25cm |
| Finish × glass | Walnut color & Beige (1) | Red / Gold / Silver / Smoke gray (4) | Rose Gold / Gold / Smoky gray / Silver (4) | White (1) |
| Light & dimming | See specifications | See specifications | See specifications | Warm White / Cool White |
| Rating | New | ★ 4.57 (77) | ★ 4.73 (37) | ★ 4.72 (46) |
The Destin family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.