Your cart is empty

Start shopping

Add order note

Chandeliers Pendant Ceiling Wall Table Floor Candle warmer Bathroom vanity Outdoor

Rayonshine

Tonks Cluster Chandelier

$284.00 USD

SKU: RSC-2016-1

Size:2 heads Dia 20cm x H 150cm

2 heads$284.00Dia 20cm x H 150cm

3 heads$426.00Dia 30cm x H 150cm

5 heads$710.00Dia 30cm x H 200cm

7 heads$994.00Dia 40cm x H 250cm

9 heads$1,278.00Dia 40cm x H 300cm

12 heads$1,704.00Dia 50cm x H 350cm

Color:Walnut Color & Black

Variant

Quantity:

Made to order · free U.S. shipping (FedEx / UPS, tracked)

PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout

Free design · made to your specfree for every customer

Free 3D lighting simulationSend a room photo — see the Tonks Cluster Chandelier in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →

Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →

Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →

Plan the ceiling

How high, how wide, how many.

Numbers from our Sizing & Installation guide. Read the guide →

Over the dining table

Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.

Pair with a dimmer · 3,000–6,000 lm for the room

Room centre

Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.

Single · round up for high ceilings

01Overview

Cluster chandelier in 6 sizes, 2 to 12 lights, scales from compact dining to dramatic foyers.

A multi-pendant chandelier with cylinder shades in matte black and warm metallic accents, available from a focused 2-light fixture to a grand 12-light arrangement. The staggered pendant design creates visual depth and distributes light across open kitchens, dining areas, and entryways without overwhelming smaller rooms. Measure your ceiling height and the space directly below before ordering—the largest 12-light version runs 11.3 feet tall.

02Gallery

03Materials & Craft

Cylinder shade design

Matte black shades with metal fittings. Creates clean, industrial look that reads modern in both walnut and black finishes.

Six scalable configs

Start at 2 lights (59″ drop) for tight corners; go to 12 lights (137.8″) for cathedral ceilings or multi-level spaces. Pick your room, not a fixed footprint.

Dimmable, standard bulbs

Works with E26/E27 bulbs you already own. Pairs with ordinary household dimmers—no proprietary gear needed.

04Size

2-LightDia 20cm (7.9″) × H 150cm (59″) | $284.00

3-LightDia 30cm (11.8″) × H 150cm (59″) | $426.00

5-LightDia 30cm (11.8″) × H 200cm (78.7″) | $710.00

7-LightDia 40cm (15.7″) × H 250cm (98.4″) | $994.00

05Dimensions

2-Light: 20cm dia × 15 🔍 Tonks Cluster Chandelier dimensions

3-Light: 30cm dia × 15 🔍 Tonks Cluster Chandelier dimensions

5-Light: 30cm dia × 20 🔍 Tonks Cluster Chandelier dimensions

7-Light: 40cm dia × 25 🔍 Tonks Cluster Chandelier dimensions

9-Light: 40cm dia × 30 🔍 Tonks Cluster Chandelier dimensions

12-Light: 50cm dia × 3 🔍

06Specifications

MaterialTravertine and metal

FinishWalnut Color or Black

ShadeBlack matte cylinder

Socket or Light sourceE26 or E27 base (standard bulbs)

Recommended bulb or KelvinSee photos; warm white or dimmable LED recommended

VoltageAC 110–240V

PowerDepends on bulb wattage; max per socket per local code

SwitchCompatible with standard household switches and dimmers

Cord or Cable150cm (59″) adjustable cables provided; longer lengths available on request

07Downloads

Data SheetPDFAssembly InstructionsComing soon3D FilesComing soon

08Questions

Which size chandelier do I need for my dining table?

2–3 lights (59″ drop) suit tables up to 5 feet wide. 5–7 lights work for 6–8 person tables in standard 9–10 foot ceilings. 9–12 lights suit high ceilings (12+ feet) or large open living spaces. Measure your ceiling drop: the fixture will hang 150–350cm, plus bulbs.

Can I use this with a dimmer switch?

Yes. The fixture is compatible with ordinary household dimmers. Use dimmable LED or warm-white incandescent bulbs for best results.

How long are the cables, and can I shorten them?

Ships with 150cm (59″) adjustable cables. Longer lengths are available on request. You can shorten cables at installation by tying them off above the canopy.

What bulbs do I need, and how many?

E26 or E27 base (standard bulbs used in most lamps). Order one bulb per light: 2 for the 2-light, 3 for the 3-light, etc. Warm white or dimmable LEDs pair best with the travertine and black metal.

Downloads

PDFSpec sheetDownload

Stone thatholds the light

Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.

From block to lamp

Every piece in the series goes through the same four stages in the workshop.

01
Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02
Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03
Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04
Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.

One stone, two cuts

Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.

Vein-cut travertine with straight banded stripes

Cross-cut travertine with cloudy pattern and open pores

III

Up close

The details you only notice once the lamp is on your ceiling.

Light falling from a carved fold in a travertine wall lamp

Rounded travertine edge of a ceiling light

Travertine shade topped with a walnut-color wood ball

Underside of a travertine pendant glowing warm

Teramo, Kitchen island — **Kitchen island**Three discs in a row over the counter.

Kennett, Bedroom — **Bedroom**A pair of wall discs either side of the bed.

Lytheris, Staircase — **Staircase**Small lights that follow the steps.

Maytoni, Dining — **Dining**Six shades along one bar, over the table.

In the room

Four rooms, one stone. Hover to pause.

Polished travertine spheres at the factory, each with its own veining

What natural stone means for you

Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.

Pieces from the series

TeramoPendant, from $233

KennettWall light, $210

LytherisWall light, $150

HerdaPendant, $164

LindbyCeiling light, from $381

CandeeiroPendant, $209

Shop all travertine lighting

30days 30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35% Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.

1day Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.

Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes

Reviews

On their walls, in their words.

Compare