Over the dining table
Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.
Pair with a dimmer · 3,000–6,000 lm for the room
Rayonshine
Pascal Wood Flush Mount Ceiling Light
Size:Dia 23cm x H 22cm
Color:Walnut Wood ＆ Travertine
Quantity:
Made to order · free U.S. shipping (FedEx / UPS, tracked)
PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout
Free design · made to your specfree for every customer
Free 3D lighting simulationSend a room photo — see the Pascal Wood Flush Mount Ceiling Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →
Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →
Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →
Frequently bought together
This item: Pascal Wood Flush Mount Ceiling LightDia 23cm x H 22cm / Walnut Wood ＆ Travertine
$255.00
Choose options
Size:Dia 23cm x H 22cm
Color:Walnut Wood ＆ Travertine
Quantity:
Size:Dia 23cm x H 22cm
Color:Walnut Wood ＆ Travertine
Quantity:
Plan the ceiling
How high, how wide, how many.
Numbers from our Sizing & Installation guide. Read the guide →
Room centre
Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.
Single · round up for high ceilings
01Overview
Travertine dome with wood sphere center—flush mount ceiling light, hardwired, takes standard bulbs.
A 9-inch flush ceiling light that reads substantial in halls and bedrooms without dominating the space. The travertine shade diffuses warm light while the wooden accent sphere creates visual depth. Suits modern interiors where natural stone and wood already appear; verify your ceiling can accommodate a hardwired fixture before ordering.
02Gallery
03Materials & Craft
Travertine Shade
Dome of natural stone with visible veining and texture. Each fixture unique due to stone's geological origin.
Wood Sphere Accent
Walnut or light wood ball centers the fixture visually. Contrasts with pale stone above.
Standard E26/E27 Socket
Uses any household bulb. Not dimmable. Works with ordinary wall switches only.
04Size
Overall9″ diameter × 8.7″ height (23 cm × 22 cm)
Shade OpeningLight diffuses downward and inward from travertine dome
MountingHardwired direct to ceiling; not plug-in
05Dimensions
06Specifications
MaterialNatural travertine dome; walnut or light wood sphere; metal hardware
Socket or Light sourceE26/E27 standard bulb socket
Recommended bulb or KelvinSee photos for warm light; bulb not included
VoltageAC 110–240V universal
PowerDepends on bulb wattage
SwitchStandard wall switch; not dimmable
Cord or CableHardwired; no cord
EnvironmentIndoor only; not waterproof
CareTravertine is natural stone with cracks and holes inherent to the material. Inspect photos before purchase if surface uniformity matters to you.
07Downloads
Data SheetComing soonAssembly InstructionsComing soon3D FilesComing soon
08Questions
Can I install this where an old ceiling light fixture exists?
Yes. If the existing fixture is hardwired and the electrical box is compatible, an electrician can swap them. Do not attempt this yourself.
Will the travertine shade crack or break?
Travertine is natural stone with visible fissures and pores—this is normal, not a defect. Inspect product photos or request images before delivery if you need confirmation.
Does this work with a dimmer switch?
No. This fixture is compatible only with standard on/off wall switches.
What bulb should I use?
Any E26 or E27 standard bulb. The fixture does not include one. Warm white (2700K) complements the natural materials.
Downloads
Stone thatholds the light
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
I
From block to lamp
Every piece in the series goes through the same four stages in the workshop.
01Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
II
One stone, two cuts
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerIII
Up close
The details you only notice once the lamp is on your ceiling.
A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.
Carved ribs. Candeeiro's rippled body, shaped by hand.
Softened edges. Lindby's bezel, rounded over by hand.
Bored from solid. The socket sits inside the stone itself.
Stone and wood. A walnut-color sphere caps Herda.
A warm underside. Light pools inside Sumit's shallow bowl.
A clean joint. Stone meets wood on Melrose.
Pores left open. Honed smooth, holes and all.
Turned true. Toscot's cylinder, bored through.
IV
In the room
Four rooms, one stone. Hover to pause.
V
What natural stone means for you
- Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
- Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
- Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
- Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.
VI
Pieces from the series
30days
30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35%
Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.
1day
Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.
Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
On their walls, in their words.
Compare
Pascal Wood Flush Mount Ceiling Light next to this year's other best-sellers.
This piece
Pascal Wood Flush Mount Ceiling Light
Travertine · Wood | 
Horizontal Shell Arm Ceiling Lamp A
MetalView → | 
Wafer Ceiling Light
WoodView → | 
Skydro Ceiling Lamp
Glass · Metal · AcrylicView → | |
|---|---|---|---|---|
| Price | $255.00 | $490.00 – $1,010.00 | $178.00 | $968.00 – $1,620.00 |
| Sizes | 1 · Dia 23cm x H 22cm | 2 · 3heads L 150cm x H 50cm / 6heads L 220cm x H 50cm | 1 · Dia 35cm x H 11cm | 2 · 5heads Dia 108cm x H 42cm / 6heads Dia 143cm x H 42cm |
| Finish × glass | Walnut Wood ＆ Travertine / Light Wood ＆ Travertine (2) | Black / White (2) | Wood Color & White (1) | Bright chrome (1) |
| Light & dimming | See specifications | See specifications | Warm Light | Warm White / Triac Warm Dimming / Stepless Dimming |
| Rating | New | ★ 4.6 (65) | ★ 4.65 (52) | ★ 4.67 (48) |
The Pascal family
Same glass, other forms.
Finish the room in one material — a pendant over the bedside, a chandelier over the table.