Bedside pair
One each side of the bed, centre about 60″ from the floor so the glass sits above the headboard. Taller styles read best here.
Pair · most bedrooms use two
Cart
Your cart is empty
Choose options
Plan the wall
Numbers from our Sizing & Installation guide. Read the guide →
One each side of the bed, centre about 60″ from the floor so the glass sits above the headboard. Taller styles read best here.
Pair · most bedrooms use two
Mix the heights — same footprint and finish, so a staggered run reads as one composition. Keep centres level at about 66″.
Set of 3 · one wall switch, equal spacing
Sconces at eye level, 28–36″ apart, either side of the mirror. This fixture is IP20 (dry rooms only) — for a bathroom choose a damp-rated sconce.
Vertical brass wall lamp with integrated LED; three heights for hallways, bedrooms, and living rooms.
The Kilter is a hardwired vertical sconce with a narrow 5cm footprint and warm brass finish—available in 60cm, 80cm, or 100cm heights to suit different wall spaces. It delivers steady, diffused warm light (3000K) without the harshness of overhead fixtures. Ideal for bedroom headboards, entryways, or accent walls; confirm your wall can be hardwired before ordering.



Natural travertine body with warm brass hardware. Patterns vary per piece. Beige fabric diffuser.
Integrated LED delivers soft, ambient light. Not dimmable with standard wall dimmers—use ordinary on/off switch only.
Requires direct wiring to your wall circuit. Not plug-in or battery-operated. Professional installation recommended.
No. The integrated LED is only compatible with standard on/off switches. Contact our support team if you need dimmable wiring options before purchase.
Hardwired only. It connects directly to your home's electrical circuit and requires professional installation.
These are the total heights of the lamp. Choose based on your wall space: 60cm suits narrow hallways, 80cm works for most bedrooms, and 100cm fills tall bedroom or living-room walls.
No. Travertine is a natural stone; each lamp has unique veining and color variation. Your fixture will differ from product images.
Downloads
Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.
Every piece in the series goes through the same four stages in the workshop.

Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.

Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.

Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.

Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.
Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.
Hover to look closer
Hover to look closerThe details you only notice once the lamp is on your ceiling.

A fold cut into solid stone. On Kennett, the bulb hides behind a carved flap, so light spills down the wall with no visible source.

Carved ribs. Candeeiro's rippled body, shaped by hand.

Softened edges. Lindby's bezel, rounded over by hand.

Bored from solid. The socket sits inside the stone itself.

Stone and wood. A walnut-color sphere caps Herda.

A warm underside. Light pools inside Sumit's shallow bowl.

A clean joint. Stone meets wood on Melrose.

Pores left open. Honed smooth, holes and all.

Turned true. Toscot's cylinder, bored through.




Four rooms, one stone. Hover to pause.

Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes
Reviews
Complete the set
Same footprint, same finish palette — a run reads as one composition.



Staggered set — same footprint, centres level on the wall
Dia 5cm x H 60cmWalnut Color & Beige · Warm Light
$252.00
Dia 5cm x H 80cmWalnut Color & Beige · Warm Light
$284.00
Dia 5cm x H 100cmWalnut Color & Beige · Warm Light
$354.00
Set of 3, one of each height · $890.00 · one finish
Added — the set is in your cart.
Compare
This piece
Kilter Wall Lamp
Travertine · Wood |
Ceto Wall Light
GlassView → |
Shell Arm Wall Sconce
MetalView → |
Kymi Wall Light
Glass · MetalView → | |
|---|---|---|---|---|
| Price | $252.00 – $354.00 | $158.00 – $257.00 | $185.00 – $390.00 | $175.00 – $230.00 |
| Sizes | 3 · Dia 5cm x H 60cm / Dia 5cm x H 80cm / Dia 5cm x H 100cm | 3 · Style A / Style B / Style C | 5 · L 60cm x H 40cm / L 80cm x H 40cm / L 120cm x H 40cm | 2 · Dia 5cm x H 60cm / Dia 5cm x H 80cm |
| Finish × glass | Walnut Color & Beige (1) | Gold + Clear / Gold + Smoked / Gold + Milk white / Black + Clear / Black + Smoked / Black + Milk white (6) | Black / White (2) | Brushed Titanium Gold & Clear / Black & Clear (2) |
| Light & dimming | Warm Light | Warm Light / Triac Warm Dimming | See specifications | Warm Light / Triac Warm Dimming |
| Rating | New | ★ 4.74 (78) | ★ 4.76 (46) | ★ 4.68 (31) |
The Kilter family
Finish the room in one material — a pendant over the bedside, a chandelier over the table.