Chandeliers Pendant Ceiling Wall Table Floor Candle warmer Bathroom vanity Outdoor

Rayonshine

Annzlee Pendant Light

$141.00 USD

SKU: RSP-HDS001

Size:Dia 12cm x H 8cm / ∅ 4.7″ x H 3.1″

Dia 12cm x H 8cm∅ 4.7″ x H 3.1″

Color:Beige

Variant

Quantity:

Made to order · free U.S. shipping (FedEx / UPS, tracked)

PayPal · Shop Pay · Apple Pay · Klarna / Afterpay at checkout

Free design · made to your specfree for every customer

Free 3D lighting simulationSend a room photo — see the Annzlee Pendant Light in your space as a photorealistic render within 24 h. No deposit, unlimited revisions.Start a free render →

Made to your specCustom size, finish or Pantone colour — designed and built in our own factory.Custom lighting →

Need a longer cord, a different finish or a dimming driver? Ask before you order — a quote comes back within 1 business day, and custom pieces are final sale.Request a change →

Plan the ceiling

How high, how wide, how many.

Numbers from our Sizing & Installation guide. Read the guide →

Over the dining table

Hang 30–36″ above the table top; the fixture about two-thirds of the table width, centred on the long axis. Add 3″ per foot of ceiling above 8 ft.

Pair with a dimmer · 3,000–6,000 lm for the room

Kitchen island

One pendant for every 24–30″ of island, equally spaced and from each end. A 6-ft island takes three small or two medium pendants.

Set of 3 · 450–600 lm each

Room centre

Add the room's length and width in feet — the sum, read in inches, is the diameter. Keep 7 ft of clearance from the floor to the lowest point.

Single · round up for high ceilings

01Overview

Travertine bell pendant with 150cm cable; plug into any E26/E27 dimmer-compatible circuit.

A 4.7″-wide travertine pendant that hangs 3.1″ deep—compact enough for tight spots, substantial enough to anchor a bedside table or kitchen corner. The frosted interior diffuses warm light without glare, working best with 40–60W equivalent bulbs. Mount on flat ceilings only; check your fixture box clearance before ordering.

02Gallery

03Materials & Craft

Travertine shell

Beige stone texture with natural pattern variation. Each fixture looks slightly different. Not waterproof.

150cm adjustable drop

Standard cable ships at 59″; custom lengths available on request. Hang it 24–30″ above a table or counter for best shadow-free light.

Dimmer ready

Works with ordinary wall switches and any household dimmer. No bulb included; accepts standard E26 or E27 screw bases.

04Size

Overall diameter12 cm / 4.7″

Overall height (shade only)8 cm / 3.1″

Ceiling plate10 cm / 3.9″

Suspension cable150 cm / 59″ (adjustable)

05Dimensions

Specification drawing 🔍

06Specifications

MaterialTravertine stone, beige finish

Socket or Light sourceE26 or E27 screw base

Recommended bulb or Kelvin40–60W equivalent LED or incandescent; 2700K warm white recommended

VoltageAC 110–240V

PowerDepends on bulb wattage

SwitchCompatible with standard wall switches and dimmers

Cord or Cable150 cm fabric-wrapped suspension cable; custom lengths available on request

EnvironmentIndoor only. IP20 rated (not waterproof).

CareWipe stone with dry cloth. Travertine patterns vary naturally; see product images for typical appearance.

07Downloads

Data SheetPDFAssembly InstructionsComing soon3D FilesComing soon

08Questions

Can I use this as a plug-in pendant light?

No. This fixture is hardwired directly to your ceiling circuit. It is not a plug-in pendant.

Does it work on a sloped or vaulted ceiling?

No. It installs only on flat ceilings. You'll need a separate adapter (not included) for sloped surfaces.

What bulb should I buy?

Buy separately: an E26 or E27 screw-base bulb, 40–60W equivalent. Warm white (2700K) looks best with the travertine. Dimmable LED or incandescent both work.

Is the travertine pattern the same in every fixture?

No. Natural stone varies. Each pendant has a unique pattern. See product images for typical examples.

Downloads

PDFSpec sheetDownload

Stone thatholds the light

Travertine is a limestone laid down by mineral springs, layer over layer, with gas bubbles trapped inside. We cut it, shape it by hand and leave those pores open, so every lamp carries the record of how its stone was made.

From block to lamp

Every piece in the series goes through the same four stages in the workshop.

01
Choosing the block
Blocks are sorted by tone and pore density. Stone with deep cracks or large voids is set aside, since it can't hold a thin wall.
02
Cutting
Water-cooled saws cut each block into slabs, discs and cylinders. The direction of the cut decides whether the shade shows stripes or clouds.
03
Shaping by hand
Shades are turned, carved and drilled one at a time. Edges are rounded off by hand so the stone feels soft, not sharp.
04
Finishing and fitting
Surfaces are ground smooth and polished, with the pores left open. Each shade is then fitted with its hardware and lit before it ships.

One stone, two cuts

Travertine forms in horizontal bands. Cut across them or along them, and the same block gives two completely different surfaces.

Vein-cut travertine with straight banded stripes

Cross-cut travertine with cloudy pattern and open pores

III

Up close

The details you only notice once the lamp is on your ceiling.

Light falling from a carved fold in a travertine wall lamp

Rounded travertine edge of a ceiling light

Travertine shade topped with a walnut-color wood ball

Underside of a travertine pendant glowing warm

Teramo, Kitchen island — **Kitchen island**Three discs in a row over the counter.

Kennett, Bedroom — **Bedroom**A pair of wall discs either side of the bed.

Lytheris, Staircase — **Staircase**Small lights that follow the steps.

Maytoni, Dining — **Dining**Six shades along one bar, over the table.

In the room

Four rooms, one stone. Hover to pause.

Polished travertine spheres at the factory, each with its own veining

What natural stone means for you

Yours will be one of a kindThe shape and color match the photos. The veining and pores won't, because no two blocks are the same.
Pits are part of the stoneSmall holes and shifts in tone are how travertine forms, not defects.
Keep it dryThe stone is porous and unsealed, so the series is for dry indoor rooms only (IP20).
Dust, don't washUse a soft, dry cloth. Skip water, acidic or harsh cleaners, and stone sealers.

Pieces from the series

TeramoPendant, from $233

KennettWall light, $210

LytherisWall light, $150

HerdaPendant, $164

LindbyCeiling light, from $381

CandeeiroPendant, $209

Shop all travertine lighting

30days 30-day returnsFrom delivery, uninstalled and in the original packaging, with a return authorisation first. No restocking fee. Transit damage reported within 72 h is replaced free.15–35% Trade programmeInterior designers, architects, contractors and hospitality buyers: discount by order value, replies within 1 business day, NET 30 on approval.

1day Reply within 1 business dayOrder help, product advice or a 3D request — +1 800-978-5754 or support@rayonshine.com, every day of the year.

Rayonshine · Est. 2013 · Wilmington, Delaware · 1,100+ orders in the last 12 months, 92% to U.S. homes

Reviews

On their walls, in their words.

Compare